Cold Room

Cold  Room

Cold Room

Cold Storage Depots

Cold room is the most preferred storage type today depending on the properties of the product to be stored.


Cold storage depots should be conditioned between -5°C and +5°C as standard.


Freezing period varies according to the product quality and storage time.


Provided an appropriate temperature level is maintained, the products will be preserved without the risk of spoilage during their storage period.


Features of Cold Storage

Walls, ceiling and floors of the room are made of polyurethane filled sandwich panels.


In large square meter storages, it is made by pouring concrete reinforced with iron on XPS floor insulation.


The panels are filled with Polyurethane of 42kg/m³ (+- 2%) density between the two sheets and their exterior surfaces are hygienic.


Both surfaces of the wall and ceiling panels are made from hot dip galvanized sheet and painted with polyester-based paint with a thickness of 0.50 mm in color code RAL9002,


Plywood coated floor panel with a durable and non-slip surface is used on the floor of the room.


Special accessories made of the same material as the panel surfaces are used in the inner and outer corner joints of the panels.


The panels are doweled and interlocking. They can be disassembled when necessary.


Lighting installation and special fixture resistant to cold are used for lighting of the rooms as standard.


Features of Cold Room Door

The doors have high quality, useful and aesthetic structures.


Hinged doors are produced as standard with 90 x 190 cm clear width.


Sliding doors are produced as standard with 200 x 250 cm clear width.


All our doors are lockable from the outside. Hinges are of the rising type.

It has a luminous anti-panic handle that can be opened from the inside even if the door is locked.


The surface sheet of our doors is polyester painted over standard galvanized coating.

42kg/m³ (+ - 2%) density polyurethane is injected between two sheets on the door wing.


Aluminum profiles and silicone-based curved rubbers are used on the door edges.


Features of Cooling System

Our freezer groups are CE certified.


Our devices are produced as fully closed type or open type according to the project to withstand the most difficult outdoor conditions.


Environmentally friendly R-404A (CFC Free) refrigerant is used in all our devices.


First class European materials and high quality Compressors made in Europe are used in all our devices.


Condensers used are specially designed and manufactured. Considering the regional conditions where the cold room will be installed, + 45° C condensation has been chosen.


The sound levels of the outdoor units of our devices comply with European Norms and silent operation is ensured thanks to the low-speed high-quality fans used.


Thanks to the automatic fan control feature of our devices, the condenser fans start and stop automatically.


Our devices are equipped with low and high pressure control and protection systems in order to ensure the highest level of security and long life of the equipment used.


High precision and high quality digital control system to adjust the room temperature to the desired value.


Our devices are fully automatic digital and manual defrost controlled and have a microprocessor with 29 different parameters.